Siemens HIPATH 20 - Manual (Page 111)

administration.fm
A31003-O1010-M100-9-76A9, 05/05/2008
HiPath 8000 - OpenStage Family, Administration Manual
3-69
Administration
Multiline Appearance/Keyset
Administration via Local Phone
3.7.3.2 Settings for a DSS key
The Key label parameter provides the DSS key with a label that is displayed on the graphic
display on a OpenStage 60/80 phone. The label is also user configurable.
Address contains the call number of the line associated with the DSS key.
The Realm parameter stores the SIP Realm of the line associated with the DSS key.
User Identifier gives the SIP user ID of the line associated with the DSS key.
Password provides the password corresponding to the SIP user ID.
The Outgoing calls parameter determines the behaviour of a call over the DSS line at the tar-
get phone. If set to "Direct", any forwarding and Do not Disturb settings on the target phone will
be overridden, so that a call will always alert. If set to Line type is set to "Normal", this is not the
case, and the call will be treated like a regular call.
Action on calls defines the handling of an active call when pressing the DSS key. If set to
"Consult", the user has an option to start a consultation with the DSS target. If set to "Transfer",
the user can only transfer the call to the DSS target. If "No action" is selected, pressing the DSS
key will have no effect.
When Allow in Overview is set to "Yes", the line corresponding to the DSS key will be visible
in the line overview on the phone’s display.
Data required
• Key label : Label to be displayed on the display.
Default: "DSS".
• Address: SIP Address of Record of the destination that is assigned to the DSS key.
• Realm: SIP Realm of the DSS destination.
|
--- Administration
|
--- System
|
--- Features
|
--- Feature Access
|
--- Call establish
|--- Deflect to DSS
|
--- Refuse DSS pickup
|
--- Administration
|
--- System
|
--- Features
|
--- Configuration
|
--- General
|
--- DSS Pickup timer