6 ldap template, 1 ftp/https access data, 6 ldap template -90 – Siemens HIPATH 20 User Manual
Page 132: 1 ftp/https access data -90
Administration
A31003-O1010-M100-9-76A9, 05/05/2008
3-90
HiPath 8000 - OpenStage Family, Administration Manual
administration.fm
Transferring Phone Software, Application and Media Files
3.10.6
LDAP Template
The LDAP template is an ASCII text file that uses an allocation list to assign directory server
attributes to input and output fields on an LDAP client. The LDAP template must be modified
correctly for successful communication between the directory server and the LDAP client.
3.10.6.1
FTP/HTTPS Access Data
If the default FTP/HTTPS access settings (see Section 3.10.2, “Common FTP/HTTPS Set-
tings”) are to be used, Use default must be set to "Yes", and only the Filename must be spec-
ified.
Data required (in every case)
•
Use default: Specifies whether the default FTP/HTTPS access settings shall be used. Val-
ue range: "Yes", "No".
Default: "No".
•
Filename: Specifies the file name of the phone software.
Data required (if not derived from Defaults)
•
Download method: Selects the protocol to be used.
Value range: "FTP", "HTTPS".
Default: "FTP".
•
Server address: IP address or hostname of the FTP/HTTPS server in use.
•
Server port: Port number of the FTP/HTTPS server in use.
Default: 21.
•
FTP account: Account at the server (if applicable).
•
FTP username: User name for accessing the server.
•
FTP password: Password corresponding to the user name.
•
FTP path: Path of the directory containing the files.
•
HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to "HTTPS".
>
LDAP is available only on OpenStage 60/80 phones.
>
The OpenStage phone supports LDAPv3.