4 music on hold, 1 ftp/https access data, 4 music on hold -84 – Siemens HIPATH 20 User Manual
Page 126: 1 ftp/https access data -84
Administration
A31003-O1010-M100-9-76A9, 05/05/2008
3-84
HiPath 8000 - OpenStage Family, Administration Manual
administration.fm
Transferring Phone Software, Application and Media Files
3.10.4
Music on Hold
If enabled by the user, the Music on Hold (MoH) sound file is played when a call is put on hold.
The following formats for Music on Hold are supported:
•
Proprietary Music on Hold format for optiPoint 410/420 phones
•
WAV format. The recommended specifications are:
•
Audio format: PCM
•
Bitrate: 16 kB/sec
•
Sampling rate: 8 kHz
•
Quantization level: 16 bit.
•
MIDI format.
•
MP3 format (OpenStage 60/80 only). A bitrate of 48 kB/sec is recommended.
3.10.4.1
FTP/HTTPS Access Data
If the default FTP/HTTPS access settings (see Section 3.10.2, “Common FTP/HTTPS Set-
tings”) are to be used, Use Default must be set to "Yes", and only the Filename must be spec-
ified.
Data required (in every case)
•
Use default: Specifies whether the default FTP/HTTPS access settings shall be used. Val-
ue range: "Yes", "No".
Default: "No".
•
Filename: Specifies the file name of the phone software.
Data required (if not derived from Defaults)
•
Download method: Selects the protocol to be used.
Value range: "FTP", "HTTPS".
Default: "FTP".
•
Server address: IP address or hostname of the FTP/HTTPS server in use.
•
Server port: Port number of the FTP/HTTPS server in use.
Default: 21.
•
FTP account: Account at the server (if applicable).
•
FTP username: User name for accessing the server.
•
FTP password: Password corresponding to the user name.
•
FTP path: Path of the directory containing the files.
•
HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to "HTTPS".