9 ringer file, 1 ftp/https access data, 9 ringer file -99 – Siemens HIPATH 20 User Manual
Page 141: 1 ftp/https access data -99
administration.fm
A31003-O1010-M100-9-76A9, 05/05/2008
HiPath 8000 - OpenStage Family, Administration Manual
3-99
Administration
Transferring Phone Software, Application and Media Files
3.10.9
Ringer File
Custom Ringtones can be uploaded to the phone. The following file formats are supported:
•
WAV format. The recommended specifications are:
•
Audio format: PCM
•
Bitrate: 16 kB/sec
•
Sampling rate: 8 kHz
•
Quantization level: 16 bit
•
MIDI format.
•
MP3 format (OpenStage 60/80 only). The OpenStage 60/80 phones are able to play MP3
files from 32 kbit/s up to 320 kbit/s. As the memory for user data is limited to 8 MB, a con-
stant bitrate of 48 kbit/sec to 112 kbit/s and a length of max. 1 minute is recommended.
Although the phone software can play stereo files, mono files are recommended, as the
phone has only 1 loudspeaker.
See the following table for estimated file size (mono files):
3.10.9.1
FTP/HTTPS Access Data
If the default FTP/HTTPS access settings (see Section 3.10.2, “Common FTP/HTTPS Set-
tings”) are to be used, Use default must be set to "Yes", and only the Filename must be spec-
ified.
Data required (in every case)
•
Use default: Specifies whether the default FTP/HTTPS access settings shall be used. Val-
ue range: "Yes", "No".
Default: "No".
•
Filename: Specifies the file name of the phone software.
Length
64 kbit/s
80 kbit/s
96 kbit/s
112 kbit/s
0:15 min
0,12 MB
0,15 MB
0,18 MB
0,21 MB
0:30 min
0,23 MB
0,29 MB
0,35 MB
0,41 MB
0:45 min
0,35 MB
0,44 MB
0,53 MB
0,62 MB
1:00 min
0,47 MB
0,59 MB
0,70 MB
0,82 MB
Tabelle 3-2