2 use dhcp, 2 use dhcp -13 – Siemens HIPATH 20 User Manual
Page 55
administration.fm
A31003-O1010-M100-9-76A9, 05/05/2008
HiPath 8000 - OpenStage Family, Administration Manual
3-13
Administration
IP Network Parameters
3.3.2
Use DHCP
If this parameter is set to "Yes", the phone will search for a DHCP server on startup and try to
obtain IP data and further configuration parameters from that central server.
If no DHCP server is available in the IP network, please deactivate this option. In this case, the
IP address, subnet mask and default gateway/route must be defined manually.
The following parameters can be obtained by DHCP:
Basic informations
•
IP Address
•
Subnet Mask
Optional informations
•
Default Route (Routers option 3)
•
IP Routing/Route 1 & 2 (Static Routes option 33)
•
SNTP IP Address (NTP Server option 42)
•
Timezone offset (Time Server Offset option 2)
•
Primary/Secondary IP Addresses (DNS Server option 6)
•
DNS Domain Name (DNS Domain option 15)
•
SIP Addresses / SIP Server & Registrar (SIP Server option 120)
•
Vendor Unique (option 43)
>
The change will only have effect if you restart the phone.