Camera drilling template, Networking information – SVAT Electronics 2CV500 - 4CH User Manual
Page 71
71
CV500 - 4CH
CAMERA DRILLING TEMPLATE
To wall mount the camera, drill three holes using a 3/16" drill bit and the template below. Insert the supplied wall anchors into holes and secure
camera to wall with supplied screws.
DVR IP ADDRESS: ________________________________________(example) 127.0.0.1
GATEWAY (ROUTER IP): ____________________________________(example) 127.0.0.1
DDNS SERVER:__________________________________________ (example) DDNS.DVRLINK.NET
NET CLIENT PORT: ________________________________________(example) 6100
WEB SERVER PORT: _______________________________________(example) 80
MAC ADDRESS: __________________________________________(example) 00-12-3A-45-67-89
EXTERNAL IP ADDRESS: ____________________________________(example) 14.14.243.113
.......................................................................................................Tear Here..........................................................................................................
NETWORKING INFORMATION
DRILL HOLES IN
THESE POSITIONS
DRILL HOLES IN
THESE POSITIONS
DRILL HOLES IN
THESE POSITIONS