SVAT Electronics 2CV500 - 4CH - Manual (Page 33)

33 CV500 - 4CH
Record Time: The start and end time is used to display the initial time and date when recording began and the final date and time
when the recording finished (or the latest date and time when backup Menu was accessed).
Backup Time: The start and end time is used to choose the time frame of the video clip to be backed up onto the USB flash drive.
Backup Capacity: This displays the size of the desired backup footage time frame. The shorter the video clip the smaller the backup
capacity will be in size.
USB Capacity: Displays the maximum capacity of the USB drive.
USB Used Size: This displays how much memory on the USB drive is currently in use.
Left Ratio: This is the amount of memory that is currently available to be used for backup.
BACKUP SETUP
The DVR allows you to backup your recorded footage onto a separate and
portable USB flash drive.
To Setup backup Recording:
1. Insert your USB flash drive into the USB port on front of the DVR.
2. Access the Main Menu by clicking Menu or move the mouse to the bottom of
the screen to reveal the pop up bar.
3. Select the Main Menu icon
.
4. In the Main Menu, select Backup set icon .
To Backup Saved Video Footage:
1. Press ENTER or click to setup the USB backup recording settings.
From this Menu you can choose the start and end time for the USB backup. This will transfer existing video footage in the backup time frame
onto the USB drive.
Note: A USB backup drive will not work if connected to the to the USB port on the back of the DVR.