SVAT Electronics 2CV500 - 4CH - Manual (Page 62)

62 CV500 - 4CH
iPhone and iTouch Viewing (Safari)
Be sure that the mobile device that is connected can connect to the internet via cell phone network or Wi-Fi. If connected to the same Wi-Fi network as
the DVR the iPhone can access the DVR cameras via the LAN (internal) IP address or the WAN (external) IP address.
1. Open up Safari on the iPhone or iTouch.
2. In the address bar type in:
http://IPADDRESS/ iphone.html.
Ex. http://74.11.213.177/iphone.html
You will be prompted to enter a
username and password. By default the
username/password is admin/admin.
You can change each single camera you are
viewing by selecting the active camera from
the drop down Menu below. Channels 1-4 are
available.
BlackBerry (Bold)
The first step is to copy the MobileViewer.jar file to a storage location on your mobile that can be accessed using the file manager on the
mobile device.
The following steps have been created with the BlackBerry Bold. Other models may result in different file locations or results.
Copy the MobileViewer.jar file from the CD or website onto the desktop.
1. Connect the BlackBerry to the computer using a USB cable.
• If prompted turn on Mass Storage Mode and enter the password
• Open My Computer
• You should see your mobile device listed as a removeable device
• Open the removeable device. Copy the MobileViewer.jar file from the
desktop onto the BlackBerry or one of the subfolders. (The folder needs to be
accessible on the BlackBerry)
• Disconnect the BlackBerry device from the computer
MOBILE VIEWING INSTALLATION GUIDE...continued