Sierra Raven EDGE - Manual (Page 90)

Configuration Commands
Rev 3.0B Feb.08 86
&W
Writes all changed modem settings. If this command is not
issued, any modified values will revert back to their previous
values at modem reset. Cannot be configured in AceManager.
*DATE=[mm/dd/yyyy],[hh:mm:ss]
Sets and queries the internal clock. Either the date and time
can be specified, or simply one of the two can be specified in
which case the unspecified value will remain unchanged. The
date and time are always specified 24‐hour notation.
• mm/dd/yyyy=date in month/day/year notation
• hh:mm:ss=time in 24‐hour notation
*DPORT=n
The modemʹs Device Port which the modem is listening on for
inbound packets/data/polls. Can also be set with the command
S110.
• n=1‐65535
*HOSTPAP=n
Use PAP to request the user login and password during PPP
negotiation on the host connection.
• n=0 : Disable PAP request (Default).
• n=1 : Takes user login and password from Windows DUN
connection and copies to *NETUID and *NETPW.
*NETALLOWZEROIP=n
Allows the displayed IP address in *NETIP to end in zero (ex.
192.168.1.0).
• n=0 : Do not allow.
• n=1 : Allow.
*NETPW=pw
The password that is used to login to the cellular network,
when required.
• pw=password (30 characters maximum)
*NETPHONE?
The modem’s phone number, if applicable or obtainable.
•