Sierra Raven EDGE - Manual (Page 105)

Raven EDGE
101 20070914
FM=n
Friends Mode ‐ Only allow specified IPs to access the Raven
modem.
• n=0 : Disable Friends mode
• n=1 : Enable Friends mode ‐ Only packets from friends will
be accepted, packets from other IP addresses are ignored.
Fn=[d.d.d.d]
Friends mode IP address.
• n=0‐9 Friends list index
• d.d.d.d = IP address
Using 255 in the IP address will allow any number.
Example: 166.129.2.255 allows access by all IPs in the range
166.129.2.0‐166.129.2.255.
Tip: ATF? will return a list of all the current Fn settings.
Logging
This group includes commands specific to the internal log.
Caution: Logging is intended for diagnostic purposes only. Extensive
use of logging features can cause degraded modem performance.
Figure 1-11: AceManager : Logging
*DBGCOMMLVL=n
Set the logging level for the host or module COM port.
• n=0 : No logging
• n=1 : Host COM Port
• n=2 : Module COM Port