At commands requiring passthru mode, Rciq, Ccid – Sierra Raven EDGE User Manual
Page 86
Configuration Commands
Rev 3.0B Feb.08
82
+RCIQ
Current Cell Info Information. GPRS or EDGE Only.
Information Displayed in AceManager
without AT Commands Listed
•
Bytes and Packets Received and Sent: Network traffic for
the applicable port.
•
Number of System Resets: Counter of the number of
system resets over the life of the modem or since the
configuration was reset.
•
Bad Password Count: Counter of the number of bad
password attempts.
•
IP Reject Count or Log: Rejected IP Data.
•
Temperature of the Internal Hardware Module: The
temperature of the internal radio module.
AT Commands Requiring PassThru mode
These commands are not displayed in AceManager.
+CCID
Subscriber Identity Module ID.
Subscriber Identity Module ID.