SATO XL400/410 - Manual (Page 82)

82 SATO RISC Printers
2. Command Codes Programming Manual
Replace Data (Partial Edit)
Command Structure:
0 (zero)
Example:
See above
Placement: Must follow A and precede all other print data
Default: None
Function:
To replace a specified area of the previous label with new data. This
command will cause the previous label to print along with any changes
specified within the current data stream.
Input:
A
H0025V0020W0BCL 608
H0025V0085WB1M8485S
H0025V0150WL0M8490S
H0025V0215 WL1M8460S
Q1Z
A
0H0025V0020WB0M8459SQ1Z
Output:
Note:
1. Specify the exact same parameters for the image to be replaced
as were specified in the original data stream, including rotation,
expansion, pitch, etc. This will ensure that the new data will
exactly replace the old image. If the replacement data contains