SATO XL400/410 - Manual (Page 33)

Programming Manual 2. Command Codes
SATO RISC Printers 33
Input:
T1H3F
0100038007C00FE01FF03FF87FFCFFFE07C007C007C007C007C00
7C007C007C0
Z
A
H150V100L0505K1H903F
W2434SH
Output:
Note:
1. When printing the custom character using the Recall command,
the character is affected by the following commands:
2. Character Expansion
3. Character Pitch
4. Line Feed
5. Rotate, Fixed Base Reference Point
6. Rotate, Moving Base Reference Point
7. The characters are stored in volatile memory and must be
reloaded if the printer power is lost.
8. Do not use ASCII or characters (carriage return or line
feed) as line delimiters within the graphic data or the actual image
will not be printed as specified.