SATO XL400/410 - Manual (Page 204)

204 SATO RISC Printers
8. Custom Characters And Graphics Programming Manual
The following example is presented to help you understand the use of the
Custom Graphics command. It demonstrates the design and printing of a
“diskette” in a 48 x 48 matrix.
1. Determine the matrix size for the graphic. It must be in 8 dot by 8 dot
blocks. The example here has six blocks horizontally and six blocks
vertically (48 x 48 dots).
2. Lay out a grid and draw the image on the grid.
• Each square represents one dot
• Blacken squares for each printed dot