SATO XL400/410 - Manual (Page 53)

Programming Manual 2. Command Codes
SATO RISC Printers 53
Form Overlay, Store
Command Structure:
&
Example:
See above
Placement: Must be preceded by all other data and placed just be-
fore the Stop command (Z)
Default: None
Function:
To store a label image in the volatile form overlay memory. Only one
label image may be stored in this memory area at a time.
Input:
A
H0001V0125
STHIS IS THE STORED IMAGE WITH A BARCODE
H0001V0165B103100*12345*
&
Z
Output:
There is no output from this command. It stores the label image in the
overlay buffer.
Note:
1. Remember that this storage is volatile. Therefore, if the printer
loses power, the overlay must be sent again.
2. The overlay is recalled using the / Form Overlay Recall
command.
3. Form overlays do not have to be recompiled each time they are
called to be printed and therefore may result in much faster print
output.