Sequential numbering – SATO XL400/410 User Manual
Page 90
90
SATO RISC Printers
2. Command Codes
Programming Manual
Sequential Numbering
Command Structure:
aaaa:
Number of times to repeat the same data (0001-9999)
b:
Plus or minus symbol (+ for increments; - for decre-
ments)
cccc.
Value of step for sequence (0001-9999)
,dd:
Number of digits for sequential numbering (01-99). The
first incrementing character position starts after the po-
sitions exempted from sequential numbering as speci-
fied in ee.
If these digits are left out, the default is 8.
,ee:
Number of digits free from sequential numbering (00-
99) starting with the right most position. If these digits
are left out, the default is 0.
Example:
In this example, the right most (least significant) three
digits would not decrement and the next four would de-
crement.
Placement:
Preceding the starting value to be incremented or de-
cremented.
Default:
None
Function:
To allow the ability to print sequential fields (text, bar codes) where all
incrementing is done within the printer. Up to eight different sequential
fields can be specified per label. Sequencing is effective for up to 99-
digit numeric data within each field.
Input: