Memory card function initialize, Initialize – SATO XL400/410 User Manual
Page 113
Programming Manual
2. Command Codes
SATO RISC Printers
113
Memory Card Function
Initialize
Command Structure:
aaaaaaa:
Eight character alphanumeric user ID
Example:
Placement:
Immediately following the
mand.
Default:
None
Function:
This clears all of the data from Memory Card in the specified slot and
prepares the card to accept data.
Input:
Output:
There is no printer output as a result of this command.
Note:
1. You must have the optional memory card to use this command.
Call your local SATO representative for information.
2. All Memory Cards must be initialized before they can be used for
the first time.
3. Care should be exercised when using this command as it
destroys any data previously written to the card. It will clear all
data from the card and assign the new ID (“satocard” in the above
example).