Using call guard – Sanyo SCP-7400 User Manual
Page 93
Using Call Guard
Your phone has two ways of alerting you when you are roaming off
the network provided to you: the onscreen roaming icon and Call
Guard. Call Guard makes it easy to manage your roaming charges by
requiring an extra step before you can place or answer a roaming call.
(This additional step is not required when you make or receive calls
while on the network provided to you.)
To turn Call Guard on or off:
1.
Press
to access the main menu.
2.
Select Settings and press
.
3.
Select Roaming and press
.
4.
Select Call Guard and press
.
5.
Select On or Off and press
.
To place roaming calls with Call Guard on:
1.
From standby mode, dial 1 + area code + the seven-digit
number. (You can also initiate a call from the Contacts directory,
Call History, or Messaging.)
2.
Press or (or
press
Options [right softkey] and
highlight Call or Call:Speaker On) and press
.
3.
Press
to proceed while the pop-up message is displayed.
– or –
Press any key to erase the pop-up message, press Options (right
softkey), highlight Roam Call, or Roam:Speaker On, and press
.
To answer incoming roaming calls with Call Guard on:
ᮣ
Press Options (right softkey), highlight Answer or
Answer:Speaker, and press
.
– or –
1.
Press or .
2.
Press
to proceed while the pop-up message is displayed.
Reminder:
If the Call Guard feature is set to
On
, you need to take extra steps to
make and receive roaming calls, even if you have selected the
Analog
setting
Section 2D: Controlling Your Roaming Experience
80