beautypg.com

Making a ready link call (1-to-1 call) – Sanyo SCP-7400 User Manual

Page 154

background image

Making a Ready Link Call (1-to-1 Call)

You can place a 1-to-1 Ready Link call by entering a Ready Link
number or by selecting a contact from the Ready Link List.

To place a Ready Link call by selecting a contact:

1.

Press R-Link (left softkey) or press

.

2.

Press Go to (left softkey), highlight the list from which you want
to place a call (Personal List, Outgoing, Incoming, or Missed), and
press .

Tip:

You can also select

Enter R-Link#

from the

Go to

option to enter a Ready Link

number directly. (See page 143 for details.)

3.

Scroll to the contact you want to call, and press and hold

to

place the call and get the floor. (You will see R-Link calling... and
Connecting... followed by “You have floor.” You can now begin
speaking.)
– or –
Scroll to the contact you want to call and press and release
to place the call. (The call will connect as described above, but
Floor is open.” will appear on the screen and either you or your
contact may press and hold

to take the floor and speak.)

Note:

During a Ready Link call, the “

floor

” is the right to speak. When you see

Floor is open.

,” the first person to press the Ready Link/Memo button (

) can

speak (while holding the button). Only the person who has the floor can speak. The
phone beeps if you press

when another contact has the floor.

4.

Continue holding

as you speak. (When you are finished

speaking, release

to allow the other contact to speak.

When the other party takes the floor, you will see the speaker’s
name and phone number and the text “has floor.”)

5.

When you are finished, press

.

Note:

When neither party has the floor during a Ready Link call, “

Floor is open.

appears on the display. If no one takes the floor for 20 seconds, the Ready Link
call ends automatically.

Tip:

If you press

or

during step 3 above, you can make a standard

voice call.

Section 2J: Using Ready Link

141