Sanyo SCP-7400 - Manual (Page 155)

Making a Ready Link Call (Group Call)
You can make a Ready Link call to all members in a Group entry,
which you have in your Ready Link List. You can communicate with
up to five members at a time.
To place a Ready Link Group call:
1. Press R-Link (left softkey) or press .
2. Press Go to (left softkey), highlight Personal Grps. and press .
3. Scroll to the group you want to call, and press and hold to
place the call and take the floor. (You will see R-Link calling... and
Connecting... followed by “You have floor.” Continue with the
Ready Link call as described on page 141.)
Ⅲ To make a Ready Link call to a group member, select your
desired group, highlight your desired group member, and
press and hold
.
Ⅲ If one of the group members takes the floor, you will see the
member’s name and Ready Link number on the display.
4. When the call is finished, press .
Tip: The phone beeps if you press when another contact has the floor.
Tip: You can also make a Group Call after checking the group member. Press
to display group members, highlight and press and hold during
step 3 above.
Tip: To redial your last Ready Link call, highlight Redial and press and hold
from the Ready Link List.
Section 2J: Using Ready Link 142