Sanyo SCP-7400 - Manual (Page 175)

Setting the Flash
To activate the flash:
1. From camera mode, press Options (right softkey).
2. Highlight Flash and press .
3. Select an option from the following and press .
Ⅲ On This Shot to activate the flash for one shot.
Ⅲ On Always to activate the flash all the time.
Ⅲ Auto to activate the flash automatically.
4. Take a picture using the phone’s main LCD as a viewfinder.
Ⅲ To deactivate this feature, select Off during step 3 above.
Tip: When the phone is open and in camera mode, press to switch
between flash modes.
Setting the Self-timer
To activate the Self-timer:
1. From camera mode, press Options (right softkey).
2. Highlight Self-timer and press .
3. Highlight the length of delay you want the timer to use
(10 seconds or 5 seconds) and press
. (The icon appears on
the lower left portion of the main LCD.)
4. Press Start (left softkey) when you are ready to start the timer.
5. Get ready for the picture. (When the timer is down to three
seconds, the Self-timer icon will turn red [
] and the phone
will begin to beep.)
Note: After taking a picture, Self-timer settings return to off.
To cancel the Self-timer after it has started:
ᮣ Press Cancel (right softkey).
Note: While the Self-timer is active, all keys are disabled except , ,
and Cancel (right softkey).
Section 2K: Using Your Phone’s Built-in Camera 162