Sanyo VSP-9000 User Manual
Page 90
English
89
Others
Appendix
(Continued)
b
b
b
b
Special Code Chart
These functions can be loaded by entering their special codes.
ERNITEC SATURN............................................ 89
MARK MERCER ................................................ 90
PELCO .............................................................. 92
SENSORMATIC ................................................. 94
b
b
b
b
ERNITEC SATURN
Code
Function
AUTOPAN
301
Saves the current position of the first limit switch.
302
Saves the current position of the second limit switch.
XXX
XXX= 0 – 255: Auto-pan speed (0=min, 255=max)
Note: Cannot use with Saturn type.
PATROL
1000
Deletes patrol order.
1XXX
XXX= 1– 128: Writes preset position “XXX” into patrol order.
2000
2XXX
Makes patrol order valid.
X= 001 – 128: Deletes preset position “XXX” from patrol order.
3XXX
X= 000 – 255: Waiting time (in seconds) upon reaching specified position
Example:
“1000” Deletes previously defined order.
“1001” Writes preset position “1” into order.
“1005” Writes preset position “5” into order.
“1006” Writes preset position “6” into order.
“2005” Deletes preset position “5”.
OTHER FUNCTIONS
4XXY
Dome cameras can be set to automatically move to the "return position" after a
set stopping time passes.
XX= 01 – 99: “Return position” (Cannot select positions No. 100 to No. 128)
Y= 0 – 9: Return time
0: 10 seconds, 1: 20 seconds, 2: 30 seconds, 3: 40 seconds, 4: 1 minute,
5: 2 minutes, 6: 5 minutes, 7: 10 minutes, 8: 20 minutes, 9: 40 minutes
4000
Invalidates movement to “return position”.
Example:
“4216”: After stopping for 5 minutes (Y=6), move to position 21 (XX=21).
400
Text display/non-display (switch)
500
Backlight compensation ON/OFF (switch)
9999
Initializes the dome camera internal memory.