Sanyo VSP-9000 - Manual (Page 68)

English
67 Software
System Setup (Setup) (Continued)
D Enabling (stopping or starting settings)
1 Click the [Enabling] tab.
2 Check the functions to turn
ON.
Uncheck the functions to turn OFF,
leaving them blank.
• Setup Matrix/Dvr/Mux
Enables display of the video equipment
menu.
• Setup Telemetry
Enables display of the camera menu.
• Autopan/Scan/Patrol
Enables automatic operation of dome
cameras.
• Joystick
Enables joystick operation.
• Camera Up/Down
Moves camera input channel up and
down. (Function only available when
matrix multiplexer is connected.)
• Address change
Enables changing the camera address
for a hard disk digital recorder channel.
When ON, a camera icon is displayed
in the upper left of the camera address
screen.
• Mon/Dvr/Mux change
Enables changing DVR-MUX address.
• Zoom/Focus/Iris
Enables changing zoom, focus, and iris
values for connected cameras.
• Aux
Enables Aux operation of connected
cameras.
• Wiper/Washer
Enables wipers and washers, special
functions of connected cameras.
• Map Environment
Displays a user-created map when
power is turned ON.
3 Make the various selections.
• To make other settings, switch using
the tabs and continue operation.
• To save settings in the PC, on the “File”
menu select “Save”.
• When selecting “Send to keyboard” on
the “File” menu, the system setup
content is uploaded to the unit.
1
?