Sony Ericsson TT4031 (SE-GM29) - Manual (Page 82)

Owner’s Manual Rev 1.0 Page 82 of 82
Description
0 Minimum functionality. Modem is OFF
1 Full functionality. Modem is ON
3.18 AT+CIND Indicator Control
Description Command Possible Responses
Set Indicator Control AT+CIND=[
[,[,…]]]
•_ +CME ERROR:
•_ OK
•_ ERROR
Read the current
setting
AT+CIND? •_ +CIND: ,,…
•_ +CME ERROR:
•_ OK
•_ ERROR
Test if the command
is supported
AT+CIND=?
•_ +CIND: (,(list of
supported s)),
(,(list of supported
s)),…
•_ +CME ERROR:
•_ OK
•_ ERROR
Used to set the values of ME indicators. value 0 means that the
indicator is off (or in state which can be identified as “off” state), 1 means
that indicator is on (or in a state which is more substantial than “off” state), 2
is more substantial than 1, and so on. If the indicator is a simple on/off style
element, it has values 0 and 1. The number of elements is ME specific. If the
ME does not allow setting of indicators or it is not currently reachable, +CME
ERROR: is returned. If a certain indicator is not writable, it cannot be
set. If the parameter is an empty field, the indicator will keep the previous
value.
Test command returns pairs, where string value is a maximum 16
character description of the indicator and compound value is the allowed
values for the indicator. If ME is not currently reachable, +CME ERROR:
is returned (refer to GSM 07.07).
Description