Sony Ericsson TT4031 (SE-GM29) - Manual (Page 214)

Owner’s Manual Rev 1.0 Page 214 of 214
Note!_ Returns messages with status value from
preferred message storage to the TE.
Entire data units are returned. If status of
the message is ‘received unread’, status in the
storage changes to ‘received read’. If listing fails,
final result code +CMS ERROR: is returned.
Description
0 Received unread message (i.e. new message)
1 Received read message
2 Stored unsent message (only applicable to SMs)
3 Stored sent message (only applicable to SMs)
4 All messages (only applicable to +CMGL command)
Note!_
Description
Integer type Value in the range of location numbers supported by the
associated memory
Note!_
Description
String type Manufacturing specific. Should be left empty but not
omitted
Note!_
Description
Integer type Value indicating in PDU mode (+CMGF=0), the length of
the actual TP data unit in octets (i.e. the RP layer SMSC
address octets are not counted in the length)
Note!_
Description
In the case of SMS: GSM 04.11 SC address followed by
GSM 03.40 TPDU in hexadecimal format: ME/TA converts
each octet of TP data unit into two IRA character long
hexadecimal number (e.g. octet with integer value 42 is
presented to TE as two characters 2A (IRA 50 and 65))
In the case of CBS: GSM 03.41 TPDU in hexadecimal