Sony Ericsson TT4031 (SE-GM29) - Manual (Page 152)

Owner’s Manual Rev 1.0 Page 152 of 152
Network
11.1 AT*E2CD Ericsson M2M Cell Description
Description Command Possible Responses
Request network cell
description
AT*E2CD= •_ ERROR
•_ OK
Read the command AT*E2CD? •_ *E2CD:
,,,
>
•_ ERROR
Show if the command is
supported
AT*E2CD=? •_ *E2CD: (list of
supported s)
•_ ERROR
Controls the presentation of an unsolicited result code E2CD: when =1,
or when there is a change in one of the network cell parameters, E2CD:
,,.
Read command returns the status of result code presentation and several
values, which show the network cell parameters.
Location information , and are returned only when =1
and the ME is registered in the network. To know if the ME is registered use
the AT+CREG command. If the ME is not registered in the cellular network an
ERROR message is returned.
Description
0 Disable network location information unsolicited result
code. Default value
1 Enable network location information unsolicited result
code *E2CD: ,,
Description
String type Two byte location area code in hexadecimal format
Description