Sony Ericsson TT4031 (SE-GM29) - Manual (Page 251)

Owner’s Manual Rev 1.0 Page 251 of 251
16.5 AT+CPUC Price Per Unit and Currency Table
Description Command Possible Responses
Set command sets the
parameters of Advice of
Charge related price per
unit and currency table
in SIM file EF
PUCT
AT+CPUC=,
[,]
•_ +CME ERROR:
•_ OK
•_ ERROR
Shows the current
values
AT+CPUC?
•_ +CPUC:
,
+CME ERROR:
•_ OK
•_ ERROR
Shows if the command
is supported
AT+CPUC=? •_ OK
•_ ERROR
Sets the parameters of Advice of Charge related price per unit and currency
table in SIM file EF
PUCT
. PUCT information can be used to convert the home
units (as used in +CAOC, +CACM and +CAMM) into currency units. SIM PIN1
or SIM PIN2 (depending on which SIM card that is used) is required to set the
parameters. If setting fails in an ME error, +CME ERROR: is returned.
Read command returns the current parameters of PUCT.
For information on the character set see AT+CSCS in the Short Message
Services section.
Description
String Alpha-identifier of the currency code (3 characters, e.g.
SEK)
Description
String type price per unit; dot is used as a decimal separator (e.g.
“2.66”)
Description
String type SIM PIN1 or SIM PIN2