Sony Ericsson TT4031 (SE-GM29) - Manual (Page 268)

Owner’s Manual Rev 1.0 Page 268 of 268
Read command gives the default adjustment for all outgoing calls (given in
), and also triggers an interrogation of the provision status of the CLIR
service (given in ).
Test command returns values supported by the TA as a compound value.
Note!_ On a per call base CLIR functionality is explained in
subclause “ITU-T V.25ter dial command”.
Description
0 Presentation indicator is used according to the
subscription of the CLIR service
1 CLIR invocation
2 CLIR suppression
Note!_
Description
0 CLIR not provisioned
1 CLIR provisioned in permanent mode
2 Unknown (e.g. no network)
3 CLIR temporary mode presentation restricted
4 CLIR temporary mode presentation allowed
Note!_
16.16 AT+CSSN Supplementary Service Notification
Description Command Possible Responses
Presentation of
notification result codes
from TA to TE
AT+CSSN=[[,]
]
•_ +CME ERROR
•_ OK
•_ ERROR
Read the current setting AT+CSSN? •_ +CSSN: ,
•_ +CME ERROR
•_ OK
•_ ERROR