Sony Ericsson TT4031 (SE-GM29) User Manual
Page 206
![background image](/manuals/135579/206/background.png)
Owner’s Manual
Rev 1.0
Page 206 of 206
Show if the
command is
supported
AT+CNMI=?
•_ +CNMI:
(list of supported
(list of supported
(list of supported
(list of supported
•_ OK
•_ ERROR
Selects the procedure for the way in which new messages received from the
network, are indicated to the TE when it is active, e.g. DTR signal is ON. If TE
is inactive (DTR signal is OFF), message receiving is carried out as specified
in GSM 03.38 (3G TS 23.038).
If the command fails and the error is related to mobile equipment or network,
the final result code CMS ERROR:
3
Forward unsolicited result codes directly to the TE. TA-TE
link specific inband technique used to embed result codes
and data when TA is in on-line data mode
0
No SMS-DELIVER indications are routed to the TE.
No class, Class 0, class 1 and class 3 use
preferred storage. Class 2 messages shall be stored in
the SIM. If it this is not possible then the MS shall send
an error message accordingly to GSM 03.38
1
SMS-DELIVER is stored into ME/TA and the indication of
the memory location is routed to the TE using unsolicited
result code:
+CMTI:
2
Class 0, class 1, and class 3 SMS-DELIVERs are routed
directly to the TE using the unsolicited result code:
+CMT:
,
enabled). About parameters in italics, refer to the show
text mode command, +CSDH
3
Class 3 SMS-DELIVERs are routed directly to TE using
unsolicited result codes +CMT:
,
CR>
parameters in italics, refer to the show text mode
command, +CSDH. Messages of other data coding
schemes result in indication as defined in