Sony Ericsson TT4031 (SE-GM29) - Manual (Page 235)

Owner’s Manual Rev 1.0 Page 235 of 235
•_ ERROR
Test if the
command is
supported
AT*E2STKL=? •_ *E2STKL: (list of supported
),
(list of supported
)
•_ +CME ERROR
•_ OK
•_ ERROR
The ME passes the parameters within SELECT ITEM command to the external
application by means of the unsolicited result code *E2STKL.
Command AT*E2STKL allows the external application to send the appropriate
answer after receiving the unsolicited result code, and before the timeout
expires.
If Answer command is sent once the timeout expires, an ERROR response is
be generated.
If parameter is not 0, a failure has occurred and no more
parameters are sent. If the extra parameters are sent, the ME indicates
ERROR.
Values follow GSM 11.14 standard.
Description
0 OK.
Performed as required. It corresponds to ‘00’ command
performed succesfully, described in the GSM standard
1 Failed.
User terminated session. It corresponds to ‘10’
Proactive session terminated by the user, described in
the GSM standard
2 Failed.
User requests backwards move. It corresponds to ‘11’
Backward move in the proactive SIM session requested
by the user
3 Failed.
No response from user. It corresponds to ‘12’ no
response from user
4 Failed.
Screen is busy: the text could not be displayed
Description