Sony Ericsson TT4031 (SE-GM29) - Manual (Page 194)

Owner’s Manual Rev 1.0 Page 194 of 194
Write message to
memory
AT+CMGW [=
[,[,]]
]
Text is entered
Z/ESC>
•_ +CMGW:
•_ +CMS ERROR:
•_ OK
•_ ERROR
Show if the command is
supported
AT+CMGW=?
•_ OK
•_ ERROR
Stores message (either SMS-DELIVER or SMS-SUBMIT) to memory storage
. Memory location of the stored message is returned. By
default message status will be set to ‘stored unsent’, but parameter
allows also other status values to be given. The entering of text is done as
specified in the send message command, +CMGS. If writing fails, final result
code +CMS ERROR: is returned.
NOTE! - SMS-COMMANDs and SMS-STATUS-REPORTs
cannot be stored in text mode.
Description
2 Stored unsent message (only applicable to SMs)
Note!_
Description
String type GSM 03.40 TP-Originating-Address Value in string
format; BCD numbers (or GSM default alphabet
characters) are converted to characters of the currently
selected TE character (refer command +CSCS). Type of
address given by
Note!_
Description
String type GSM 03.40 TP-Destination-Address Value in string
format; BCD numbers (or GSM default alphabet
characters) are converted to characters of the currently
selected TE character (refer command +CSCS). Type of
address given by
Note!_
Description
String type GSM 04.11 TP-Originating-Address Type-of-Address octet
in integer format (default refer )
Note!_