Sony Ericsson TT4031 (SE-GM29) - Manual (Page 124)

Owner’s Manual Rev 1.0 Page 124 of 124
that is used in the +CGDCONT command, the +CGQREQ command is
effectively an extension to the +CGDCONT command. The QoS profile
consists of a number of parameters, each of which may be set to a separate
value.
A special form of the set command, +CGQREQ= causes the requested
profile for context number to become undefined.
Description
Integer type Parameter which specifies a particular PDP context
definition
Description
0 Subscribed (from network) value used
1 High priority
2 Normal priority
3 Low priority
Description
0 Subscribed (from network) value used
1-4 Delay class
Description
0 Subscribed (from network) value used
1-5 Reliability class
Description
0 Subscribed (from network) value used
1 Up to 1 000 (8 kbits/s)
2 Up to 2 000 (16 kbits/s)
3 Up to 4 000 (32 kbits/s)
4 Up to 8 000 (64 kbits/s)
5 Up to 16 000 (128 kbits/s)
6 Up to 32 000 (256 kbits/s)