10 at+cgsms select service for mo sms messages – Sony Ericsson TT4031 (SE-GM29) User Manual
Page 127
Owner’s Manual
Rev 1.0
Page 127 of 127
String type
Two byte location area code in hexadecimal format
Note!_
String type
Two byte cell ID in hexadecimal format
Note!_
6.10 AT+CGSMS
Select Service for MO SMS Messages
Description Command Possible
Responses
Set service or service
preference
+CGSMS=[
•_ ERROR
Read the command
+CGSMS?
•_ +CGSMS:
•_ OK
•_ ERROR
Test if the command is
supported
+CGSMS=?
•_ +CGSMS: (list of
available
•_ OK
•_ ERROR
Used to specify the service or service preference that the MS will use to send
MO SMS messages. The read command returns the currently selected service
or service preference.
2
GPRS/packet domain preferred (use circuit switched if
GPRS/packet domain not available)
3
Circuit switched preferred (use GPRS/packet domain if
circuit switched not available)