Sony Ericsson TT4031 (SE-GM29) - Manual (Page 64)

Owner’s Manual Rev 1.0 Page 64 of 64
2.3 ATD Dial
Description Command Possible Responses
•_ Originate a call and
dial the phone
number specified in
the command as
or
•_ Do a network detect
ATD[;] •_ CONNECT
•_ CONNECT
•_ NO CARRIER
•_ ERROR
•_ NO DIAL TONE
•_ BUSY
•_ OK
Dial the phone number
stored in the mobile
phone which is located
by the index
ATD>ME[;] •_ CONNECT
•_ CONNECT
•_ NO CARRIER
•_ ERROR
•_ NO DIAL TONE
•_ BUSY
•_ OK
Dial the phone number
stored in the SIM card
which is located by the
index
ATD>SM[;] •_ CONNECT
•_ CONNECT
•_ NO CARRIER
•_ ERROR
•_ NO DIAL TONE
•_ BUSY
•_ OK
Dial the phone number
stored in the Last dialled
number list on the SIM
card, which is located by
the index
The most recently
dialled number is
assumed to have
="1"
ATD>LD[;] •_ CONNECT
•_ CONNECT
•_ NO CARRIER
•_ ERROR
•_ NO DIAL TONE
•_ BUSY
•_ OK
Redial the last phone
number dialled.
Ericsson specific
ATDL[;] ...
Used to initiate a phone connection, which may be data or voice (phone
number terminated by semicolon). The phone number used to establish the
connection will consist of digits and modifiers, or a stored number
specification.
If the dial string is followed by a semicolon this informs the phone that the
number is a voice rather than a data number.