Sony Ericsson TT4031 (SE-GM29) - Manual (Page 156)

Owner’s Manual Rev 1.0 Page 156 of 156
AT*E2EMM=7
*E2EMM:,,,
,,[,,
,][,,,
,,,],
,< neighborcell1 mnc>,,
,,,
[,< neighborcell1 c1>,],
,,,
,,,
[,,]
…
,,,
,,,
[,,]
OK
The mode setting in the set command has the combination listed in the
table below.
When =5, the shot information is the same as in =1, but
neighbouring cells, which have to be up to 16. This is the information that
comes from the Serving Cell through the BCCH, reporting the BTS that are on
the Serving Cell's surroundings.
Description
0 Disable network monitoring unsolicited result code.
Default value
1 One shot presentation of the network location
information. Display mode with headers and
line separators
2 Enable network location information unsolicited result
code in Display mode (like n=1). There will be continuous
unsolicited information responses seconds apart
3 One shot presentation of the compact network location
information
4 Enable compact network location information unsolicited
result code. There will be continuous unsolicited
information responses seconds apart
5 One shot presentation of the network location
information (verbose format), including 16 BTSs, coming
from the Serving Cell signalling information
6 As n=5 format but there will be continuous unsolicited
information responses seconds apart
7 One shot presentation of the network information (same
information as in n=1) but no headers or line
separators. Neighbor cells from the Toplist