JVC CA-NXHD10R - Manual (Page 50)

– 45 –
CD AUTO
AAC 128
CD and AUTO
indicators
SMART COMP. CD AUTO REC
TU AUTO REC Canceled
Ex. When the function is currently turned “OFF”
(initial setting)
To automatically record CDs—CD Auto Recording
You can automatically make a recording when playing back
a CD entirely (from the first track to the last) in Normal
play. (You need to start playback by pressing
CD 3/8.)
The recording will be stored in a library named “Library
CD.”
• “AAC 128 kbps” is automatically selected as the
recording format.
• CD Auto Recording will not work for Program play,
Random play, and Repeat play.
• CD Auto Recording will be canceled when Recording
Timer starts operating.
On the unit ONLY:
1
Press AUTO MODE repeatedly until “CD AUTO
REC” appears in the main display.
• Each time you press the button, Auto Modes change
as follows:
2
Press SELECT ¢ or SELECT 4 to select “ON?”
3
Press SET to finish the setting.
The CD and AUTO indicators light up on the display.
To deactivate the function, repeat steps 1 to 3, and select
“OFF?” in step 2.
The CD and AUTO indicators go off.
If you turn on the function while playing a CD
Recording will not begin. The function will work next time you
start playing a CD.
How CD Auto Recording actually works?
Recording automatically starts when you start CD play in
Normal play by pressing
CD 3/8.
The HDD lamp lights in red, and the CD and AUTO
indicators start flashing on the display.
CD Auto Recording will be automatically canceled if—
• you turn off the unit
• you change the source
• you stop, skip, search, pause or eject CD
• you select a track number directly
• you deactivate CD Auto Recording
Recording will not be stored in “Library CD.”
If you press
7 or 0 CD while CD Auto Recording is
performed
“PLEASE WAIT” may appear in the main display for a moment.
To change the information shown in the main display
while recording
Each time you press
DISP/CHARA on the remote control,
the information in the main display changes as follows:
1 Current track number
2 Elapsed playing time
3 Remaining recording time in the HDD (counts
down about every 10 seconds), calculated based on
the current setting of the recording mode
4 Current recording mode
If you play a digitally duplicated CD-R or CD-RW
CD Auto Recording will not start. To record a disc of this type, use
the ordinary recording methods described on pages 47 and 48.
If the recording is not done correctly or a track is
skipped while it is being played
Use analog recording (see page 51).
CD AUTO
REC
AAC 128
Track No.
Elapsed playing time
Clock
1 2 3
4
EN42-51_NXHD10R[B]f.pm6 02.6.24, 9:06 AM 45