JVC CA-NXHD10R - Manual (Page 35)

– 30 –
• Each time you press the button, play modes change
as follows:
4
Press the number buttons to select the tracks you
want.
• For how to use the number buttons, see “To go to
another track directly using the number buttons” on
page 29.
5
Press CD 3/8.
The tracks are played in the order you have programed.
Program play ends when all the programed tracks are
played (unless Repeat play is activated).
To stop during play, press
7.
To exit from Program play mode, press FM/PLAY MODE
once or twice after stopping the playback so that the unit
enters another play mode (Random play or Normal play).
To check the program contents
Before playing, you can check the program contents by
pressing
4 or ¢ on the remote control.
•
4 : Shows the programed tracks in the reverse order.
•
¢ : Shows them in the programed order.
To modify the program
Before playing, you can erase the last programed track by
pressing
CANCEL. Each time you press the button, the last
programed track is erased from the program.
To add tracks in the program before you start play,
simply select track numbers you want to add.
To erase the entire program, after stopping the playback,
press and hold
CANCEL until “CD PROGRAM ALL
CLEAR” appears in the main display.
• Turning off the unit or ejecting a CD also erases the
entire program.
RANDOM
indicator RANDOM
AAC 128
Continued
If you try to program a 33rd step
“MEMORY FULL” will appear in the main display.
If your entry is ignored
You have tried to program a track number that does not exist on the
CD (for example, selecting track 14 on a CD that only has 12
tracks). Such entries are ignored.
If the total playing time is over “1:39:59”
The total playing time will not be shown. (“– – : – –” will appear.)
Playing at Random—Random Play
The tracks of a loaded CD will play at random.
On the remote control ONLY:
1
Load a CD.
2
Press CD 3/8, then 7.
The source is changed to “CD.”
3
Press FM/PLAY MODE repeatedly until “CD
RANDOM” appears in the main display.
The RANDOM indicator lights up on the display.
• Each time you press the button, play modes change
as follows:
4
Press CD 3/8.
The tracks are played at random.
Random play ends when all the tracks are played once
(unless Repeat play is activated).
CD PROGRAM
(Program play)
CD RANDOM
(Random play)
CD NORMAL
(Normal play)
CD PROGRAM
(Program play)
CD RANDOM
(Random play)
CD NORMAL
(Normal play)
Step No.
Ex. Track No. 5 is selected for the first step
Total playing time
The current track
EN27-31_NXHD10R[B]f.pm6 02.6.24, 9:02 AM 30