JVC CA-NXHD10R - Manual (Page 27)

– 22 –
More about the Enhanced Other Networks function
• The Enhanced Other Networks data sent from some stations
may not be compatible with this unit.
• While listening to a program tuned in by this function, the
station does not change even if another network station starts
broadcasting a program of the same Enhanced Other Networks
data.
• While listening to a program tuned in by this function, you can
only use the TA/News/Info and RDS DISP buttons as the tuner
operation buttons. If you press any other button, “LOCKED!”
appears in the main display.
• If the stations alternate intermittently between the station tuned
by this function and the currently tuned station (“WAITING”
flashes in the main display), press
TA/News/Info to cancel the
function.
If you do not press the button, the currently tuned station is
received finally (“NOT FOUND” appears this time), and the
indication of the Enhanced Other Networks data type flashing
on the display disappears.
Alarm function
If an “Alarm!” (Emergency) signal is received from a
station while listening to an RDS station sending the
Enhanced Other Networks data, the unit automatically
switches to the station broadcasting the “Alarm!” signal.
Test function
The TEST signal is used for testing the “Alarm!” signal.
Therefore, it makes the unit work in the same way as the
“Alarm!” signal does.
If a TEST signal is received from a station while
listening to an RDS station sending the Enhanced Other
Networks data, the unit automatically switches to the
station broadcasting the TEST signal.
How the Enhanced Other Networks function
actually works:
CASE 1
If there is no station broadcasting the program you
have selected
The unit continues tuning in the current station.
«
When a station starts broadcasting the program you
have selected, the unit automatically switches to the
station. The indicator of received PTY code starts
flashing.
«
When the program is over, “END” appears in the main
display, and the unit goes back to the previously tuned
station, but the Enhanced Other Networks function still
remains activated.
CASE 2
If there is a station broadcasting the program you
have selected
The unit tunes in the program. The indicator of received
PTY code starts flashing.
«
When the program is over, “END” appears in the main
display, the unit goes back to the previously tuned
station, but the Enhanced Other Networks function still
remains activated.
CASE 3
If the FM station you are listening to is broadcasting
the program you have selected
The unit continues to receive the station but the
indicator of received PTY code starts flashing.
«
When the program is over, “END” appears in the main
display, the indicator of received PTY code stops
flashing and remains lit, but the Enhanced Other
Networks function still remains activated.
Continued
EN17-23_NXHD10R[B]f.pm6 02.6.24, 9:00 AM 22