JVC CA-NXHD10R - Manual (Page 24)

– 19 –
Tuning in to a Preset Station
On the remote control ONLY:
1
Press TUNER/LINE repeatedly until “FM” or “AM”
is selected.
The unit automatically turns on and tunes in to the
previously received station.
• Each time you press the button, the source changes as
follows:
* If you have changed the source name of the external
component, the currently selected source name will appear
(see page 26).
2
Press the number buttons to select a preset number.
Ex. For preset number 5, press 5.
For preset number 15, press +10, then 5.
For preset number 20, press +10, then 10.
To record a broadcast program automatically
The unit is provided with Tuner Auto Recording to
automatically record any tuned station’s program for
about 30 minutes.
Selecting any station automatically starts recording into
the HDD without any setting.
• For more details on Tuner Auto Recording, see page
46.
Ex. When number 5 is selected
Presetting Stations
You can preset 30 FM and 15 AM (MW/LW) stations
manually following the procedure below.
In some cases, test frequencies have been already memorized
for the tuner since the factory examined the tuner preset
function before shipment. This is not a malfunction. You can
preset the stations you want into memory by following the
presetting method.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 2
again.
On the remote control ONLY:
1
Tune in to the station you want to preset.
• See “Tuning in to a Station” on page 18.
2
Press SET.
The preset number 1 starts flashing.
• To cancel the presetting, press CANCEL.
3
Press the number buttons to select a preset number.
Ex. For preset number 5, press 5.
For preset number 15, press +10, then 5.
For preset number 20, press +10, then 10.
4
Press SET again.
“STORED” appears in the main display.
The tuned station in step 1 is stored in the preset
number selected in step 3.
• Storing a new station on a used number erases the
previously stored one.
When you unplug the AC power cord or if a power
failure occurs
The preset stations will be erased in a few days. If this happens,
preset the stations again.
*
FM AM
LINE
(See page 25.)
EN17-23_NXHD10R[B]f.pm6 02.6.24, 9:00 AM 19