JVC CA-NXHD10R - Manual (Page 11)

– 6 –
Getting Started
Unpacking
After unpacking, check to be sure that you have all the
following items.
The number in the parentheses indicates the quantity of the
pieces supplied.
• FM antenna (1)
• AM (MW/LW) loop antenna (1)
• Remote control (1)
• Batteries (2)
• AC power cord (1)
If any is missing, consult your dealer immediately.
Connecting Antennas
FM antenna
1
Attach the FM antenna to the FM (75
Ω
) COAXIAL
terminal.
2
Extend the FM antenna.
3
Fasten it up in the position which gives you the best
reception.
About the supplied FM antenna
The FM antenna supplied with this unit can be used as temporary
measure. If reception is poor, you can connect an outdoor FM
antenna.
To connect an outdoor FM antenna
Before connecting it, disconnect the supplied FM antenna.
FM antenna (supplied)
Outdoor FM
antenna
(not supplied)
Continued
A 75
Ω
antenna with coaxial type connector
(IEC or DIN 45325) should be used.
EN01-09_NXHD10R[B]f.pm6 02.6.24, 8:57 AM 6