JVC VR-609 - Manual (Page 79)

-- 79 --
VR-609
5.7.7.3 Password
・Click the "Use Password" check box to use Password.
・ The password must be 4 digit numbers.
・ Enter “New Password” and “Confirm” using Channel Selection buttons.
Please use the each 1-9 Channel Selection buttons.
・ Setup : Setup menu, PTZ : Control camera, REC : Recording, PB : Playback.
・Press "Add" button to display the upper screen.
・ Each user may have their own unique ID.
・ Each user may have their own unique password.
・ Each user have a different permission to use. Even user have setup right, some menu can
not access. (ex. Administration)
・ For input User ID, using right/left buttons and up/down buttons (or JOG).
・ Enter “New Password” and “Confirm” using Channel Selection buttons. Please use the
each 1-9 Channel Selection buttons.
・ User ID can set up to 8 characters.
When the "Use Password" on the "Password" menu is checked, a default
password will be set-up if it changes the other view from the menu without
inputting a password. The default password is "1234".
!
・The following setup cannot be changed by the user who checks a "Setup".
Camera Details Setup, Pan/Tilt Model Select, Recording Setup, Alarm setup,
Audio Setup, HDD Management, and Administration. For changing these setup,
please open a Menu by Administrator authority.
・Operation-off can be carried out only by the user of a "Setup" or "PTZ"
authority, and Administrator authority.
!