JVC VR-609 - Manual (Page 71)

-- 71 --
VR-609
■ How to connect removable HDD
The jumper of HDD which connects additionally, set-up as slave.
(Refer to HDD’s user manual for setup jumper.)
! ・When add HDD or take HDD, please turn off the power. HDD is possible to
damage when its’ remove while power is on.
・Please turn off the power when you connect external IEEE1394 with DVR for the
purpose of avoiding damage.
Separate inside
rack from hard rack. Disengage the claws
at the side of the rack
while lifting the
handle, Open inside
rack and push top
cover, Connect data cable of
the inside rack with the
power line exactly.
Close the cover of
the inside rack.
・Please do not change HDD composition during record. When HDD composition is
changed during record, event reference should input the time after HDD composition
change.
・Although an error is displayed when troubles occur in a HDD, since an error message
cannot be correctly displayed depending on HDD, please use as a standard. Since the
troubled HDD is separated by operate Off/ On, please specify the HDD in question
with a "Indicate" button.
Fix the removable HDD to
the inside rack by using
provided 4 screws.