JVC VR-609 - Manual (Page 41)

-- 41 --
VR-609
5.1.1.2 How to Use
1) Check camera ID setup value from the camera setup menu.
2) Select Pan/Tilt Control from the menu.
3) Select motion by Jog or left/right button.
4) Turn the Shuttle left or right.
・Check whether camera ID and Pan/Tilt camera ID are the same installation if the
Pan/Tilt camera does not activate.
・Also, check whether the control line of the Pan/Tilt camera is in the correct
location.
5) Press the EXIT button to return to the Camera Setup Menu.
・Operation of cameras from the VR-609 unit will be disabled when an external
remote controller is connected.
・Status on the screen is not updated during camera operation. Date/time will not be
displayed as well.
!