JVC VR-609 User Manual
Page 35

-- 35 --
VR-609
4. Function Explanation and Menu Setting
This system can set-up the motion conditions of the camera, recording conditions,
alarms, audio, and system settings from the monitor menu.
4.1 Front Button Explanation
4.1.1 Before Use
Make sure all the devices are properly connected as described in Chapter 3, then
connect to the power source.
4.1.2 Camera Selection / Display / User / AUTO buttons
・It displays the selected channel on the monitor by pressing the INPUT button during
live or playback. It is used for selecting INPUT_CH at the MENU.
・Selected monitor configuration is displayed on the monitor “USER” button is for
screen configuration, which is set-up from the menu. 1,4,9,6,7 screen is displayed
as pressing the DISPLAY button during live. 1,4,9 screen is displayed as pressing
the DISPLAY button during playback.
!
・Alarm Reset button is for stopping the external alarm motion.
・AUTO Button is ON/OFF. As pressing this buttons, a single screen
and a divided screen is switched automatically.
・Camera sequence display on normal display screen.
・Pattern sequence display on user display screen.
Please turn On/Off with a front operate switch. Turn On/Off a power switch on the back
in the state of Operation OFF. HDD can be damaged if turns On/Off in the state of
Operation ON.