JVC DR-M10 - Manual (Page 63)

Masterpage:Right-No-Heading
EN
63
Filename [DR-M10U_08Recording.fm]
Page 63 January 20, 2004 10:20 am
D
Enter the receiving channel position number.
A Press rt to select “DVD CH”, then press ENTER.
B Press rt to select the number of the unit’s channel
position on which the Guide Channel number’s
broadcast is received by the unit or the DBS receiver.
Then press ENTER.
● To timer-record a satellite program with the VCR Plus+ system,
you need to install a supplied Controller and perform the
procedure described in “Cable Box Control Setting”
(
੬
pg. 29) or “DBS Receiver Control Setting” (
੬
pg. 32).
● Repeat steps C and D as necessary.
E
Complete the setting.
Press SET UP.
Guide Channel Number
“Guide Channel (GUIDE CH) number” refers to the assigned
TV station numbers, according to broadcast area, for the VCR
Plus+ timer recording. The Guide Channel numbers can be
found in most TV listings.
DR-M10U_08Recording.fm Page 63 Tuesday, January 20, 2004 10:24 AM