JVC DR-M10 - Manual (Page 61)

Masterpage:Right-No-Heading
EN
61
Filename [DR-M10U_08Recording.fm]
Page 61 January 20, 2004 10:20 am
E
Set the following recording options as
required.
A Press w e to select the desired option.
B Press rt to select the desired setting, then press
ENTER.
“REC MODE” (
੬
pg. 58, “Recording Speed”) (
੬
pg. 59,
“Free Rate Function”), “DAILY/WEEKLY” (
੬
pg. 61,
“Daily/Weekly Rec Function”), “NAME” (
੬
pg. 76,
“Modify Program Name”), and “STOP” (To advance/go
back the stop time by 30 minutes, press and hold rt).
F
Access the confirmation screen.
Press ENTER.
G
Complete timer programing.
Press ENTER.
● To program another timer, repeat steps B – G.
● If “PROGRAM OVERLAPPED” appears on the TV screen, see
“When programs overlap each other” (
੬
pg. 70).
H
Engage the unit’s timer mode.
Press # (TIMER). The unit turns off automatically and
“#” appears on the front display panel.
● To disengage the timer mode, press # (TIMER) again.
NOTES:
● There may be cases that VCR Plus+ Timer Programing function
prolongs the stop time of the programing.
● When two successive programs are recorded on a DVD-RW
disc with VCR Plus+ Timer Programing function, the beginning
of the second one may be left off the recording.
● VCR Plus+ Timer Programing is not possible on the discs used
exclusively for On-Disc Timer Programing.
● If the copy limited program is received during timer-recording,
the unit enters Record Pause mode. Recording starts again if it
is switched to a recordable broadcast during the time you
programed.
Daily/Weekly Rec Function
You can record programs with one of the following weekly/daily
timer settings.
IMPORTANT
If you have moved to a different area or if a broadcasting
station's channel number has been changed, the wrong
channel number will be displayed on the VCR Plus+ program
screen in step
C. When this happens, set the correct Guide
Channel number for that station. (
੬
pg. 60, “VCR Plus+ ®
Timer Programing”)
Cable Box or DBS Receiver Users
To timer-record a satellite broadcast using the VCR Plus+
system:
A Perform “Cable Box Control Setting” (
੬
pg. 29) or “DBS
Receiver Control Setting” (
੬
pg. 32).
B Perform “VCR Plus+ ® Timer Programing”.
C Leave the Cable Box or DBS receiver’s power on.
WEEKLY Select to record a weekly program.
MON–FRI Select to record a daily program from
Monday through Friday.
MON–SAT Select to record a daily program from
Monday through Saturday.
SUN–SAT Select to record a daily program from Sunday
through Saturday.
DR-M10U_08Recording.fm Page 61 Tuesday, January 20, 2004 10:24 AM