Operating jvc’s audio/video components, English – JVC RX-9010VBK User Manual

Page 68

English

Operating JVC’s Audio/Video Components

You can operate JVC’s audio and video components with this receiver’s remote control, since control signals for JVC
components are preset in the remote control.

Operating Audio Components

Tuner

You can always perform the following operations:

FM/AM

Alternates between FM and AM.

After pressing FM/AM, you can perform the following operations:

1 – 10, +10

Selects a preset channel number directly.
For channel number 5, press 5.
For channel number 15, press +10, then 5.
For channel number 20, press +10, then 10.

TUNING UP/DOWN

: Tunes into stations.

FM MODE

Changes the FM reception mode.

Sound control section (Amplifier)

You can always perform the following operations:

SURROUND ON/OFF

Turns on or off the Surround modes
— Dolby Pro Logic, Dolby Digital,
and DTS Digital Surround.

DSP MODE

Selects the DSP modes.

TEST

Turns on or off the test tone output.

After pressing SOUND, you can perform the following operations:

SUBWFR then LEVEL +/–

: Adjusts the subwoofer output level.

CENTER then LEVEL +/–

Adjusts the center speaker output
level.

REAR•L then LEVEL +/–

Adjusts the left rear speaker output
level.

REAR•R then LEVEL +/–

Adjusts the right rear speaker output
level.

DIGITAL EQ then LEVEL +/–

: Selects the audio band and adjusts its

frequency level.

BALANCE L/BALANCE R

: Adjusts the output balance of the

front speakers.

EFFECT

Selects the effect level.

CENTER TONE

Selects the center tone.

ROOM SIZE

Selects the room size.

LIVENESS

Selects the liveness.

Notes:

• After adjusting sounds, press the corresponding source selecting

button to operate your target source by using the 10 keys;
otherwise, the 10 keys cannot be used for operating your target
source.

• Each time you press LEVEL + or LEVEL –, the indication

corresponding to the function you have selected appears on the
display window on the remote control.

CD player

After pressing CD, you can perform the following operations on the
CD player:

PLAY

Starts playing.

Returns to the beginning of the current (or

previous) track.

¢:

Skips to the beginning of the next track.

STOP

Stops playing.

PAUSE

Pauses playing. To release it, press PLAY.

1 – 10, +10

Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.

SUB ROOM

MAIN ROOM

Indications

SOUND

S WFR

CTR

REARL
REARR

Buttons

BALANCE L

BALANCE R

EFFECT

ROOM SIZE

LIVENESS

CENTER TONE

SUBWFR

CENTER

REAR•L
REAR•R

DIGITAL EQ

IMPORTANT:

To operate JVC’s audio components using this remote control:
• You need to connect JVC audio components through the COMPU

LINK (SYNCHRO) jacks (see page 55) in addition to the
connections using cables with RCA pin plugs (see pages 7 and 8).

• Aim the remote control directly at the remote sensor on the

receiver.

• If you use the buttons on the front panel or the menu function to

choose a source, the remote control will not operate that source. To
operate a source with the remote control, the source must be
selected using source selecting buttons on the remote control.

• To operate the cassette deck or MD recorder using the COMPU

LINK remote control system, set the source name correctly. (See
page 33.)

• Refer also to the manuals supplied with your components.

When using the remote control supplied with this receiver:

•

For the main room operations

– Set MAIN ROOM/SUB ROOM selector to “MAIN ROOM.”

•

For the sub-room operations

– Set MAIN ROOM/SUB ROOM selector to

“SUB ROOM.”

– Check to see if the following information

appear on the display window on the remote
control:

Indications

MAIN ROOM/

SUB ROOM selector

MAIN ROOM

SUB ROOM

MAIN ROOM

SUB ROOM

After pressing SOUND, the following function are
assigned to the specific number buttons:

Buttons

PLAY

4/REW

FF/

STOP

PAUSE

1 – 10, +10, 0

Indications

one of the selected
source names listed
above

After selecting a source:

Buttons

Indications

FM/AM

TUNER

CDR

PHONO

TAPE/MD

TAPE

CONTROL (repeatedly)

VCR1

= TAPE = CDR =

CDDSC

= (back to the beginning)

SOUND

* MAIN ROOM or SUB ROOM indicator does not appear when no

indicators appear on the display window.

When you press the buttons listed above, the indication appears
for 5 – 10 seconds for your confirmation.

EN62-74.RX-9010VBK[C]f

01.4.13, 5:40 PM