English – JVC RX-9010VBK User Manual

Page 66

English

CONNECTIONS 3: Video Cable Connection

This receiver is equipped with three types of the video terminals — S-video, composite video, or component video, and the signals
coming into this receiver through one type of video terminals can output only through the same type of the terminal. So you need to
connect the VCR and/or DVD player to the TV using one of the following three ways:

You can control the connected video components using this remote
control: Aim the remote control at the remote sensors on the target
video component(s) or on the receiver directly.
For details, see page 62.

The AV COMPU LINK remote control system allows you to use the
five basic functions listed below.

Remote Control of the TV, DVD player, and VCR
Using This Remote Control

IMPORTANT:

To operate the video components using the IR signal transmitter
(supplied), place it so that it is aimed at the remote sensor on the
target video component(s).
• The IR signal transmitter can send signals at a distance of 10 feet

(3 m).

One-Touch Video Play

• Simply by inserting a video cassette without its safety tab into the

VCR 1 (the VCR connected to the VCR 1 jacks), you can enjoy
the video playback without setting other switches manually. The
receiver automatically turns on and changes the main room
source to “VCR 1.”
The TV automatically turns on and changes the input mode to the
position so that you can view the playback picture.
When you insert a video cassette with its safety tab, press the play
(

3) button on the VCR 1 or on its remote control. So, you can get

the same result.
– If the receiver is already turned on, and the SUB ROOM

indicator lights on the display, the receiver changes the sub-
room source to “VCR 1.” (In this case, the TV will not turn on
automatically.)

• When you press PLAY on the remote control supplied with this

receiver for operating the VCR 1, the receiver automatically turns
on and changes the main room source or sub-room source
(depending on MAIN ROOM/SUB ROOM selector setting on the
remote control) to “VCR 1.”
– For main room operations only: The TV automatically turns on

and changes the input mode to the position so that you can view
the playback picture.

To Video Input 2

Composite
video cable

RX-9010VBK

Source

Equipment

Note:

If you connect the DVD player and the DBS tuner to this receiver using the video component terminals, change the video input
terminal setting to “COMPNT”(see page 32).

Note:

If you connect the DVD player and the DBS tuner to this receiver using the S-video terminals, change the video input terminal
setting to “S/C” (see page 32).

CASE 1

CASE 2

CASE 3

Note:

If you connect the DVD player and the DBS tuner to this receiver using the composite video terminals, change the video input
terminal setting to “S/C” (see page 32).

To Video Input 1

RX-9010VBK

S-video cable

Source

Equipment

When connecting the source equipment to the receiver using the composite video terminals, connect also this
receiver to the TVs’ Video Input 2 terminal (composite video input) using composite video cables.

DVD

DVD player

VCR

IR signal transmitter

RX-9010VBK

When connecting the source equipment to the receiver using the component video terminals, connect also this
receiver to the TVs’ Video Input 2 terminals (component video input) using component video cables.

To Video Input 2

Component
video cable

RX-9010VBK

Source

Equipment

When connecting the source equipment to the receiver using the S-video terminals, connect also this receiver
to the TVs’ Video Input 1 terminal using S-video cables.

EN62-74.RX-9010VBK[C]f

01.4.13, 5:40 PM