JVC RX-9010VBK - Manual (Page 27)

24
English
From the remote control:
1. Set MAIN ROOM/SUB ROOM selector to “SUB
ROOM.”
Now the buttons on the remote control work for the sub-room
operations.
2. Press AUDIO POWER ON.
The STANDBY lamp on the front panel goes off, and the SUB
ROOM indicator lights up on the display (and the SPEAKERS
SUB ROOM indicator also lights up on the display if it has been
activated).
• The display does not show the indication for the sub-room
operations, but you can operate the sub-room.
• If the SPEAKERS SUB ROOM indicator is not lit on the
display, see “Activating the Sub-room Front Speakers” on
page 26.
To turn off the power (into standby mode), press
AUDIO POWER STANDBY.
The STANDBY lamp lights red.
Note:
If you have turned off the receiver with the volume level set at more
than level “40,” the volume level will be automatically set at level “40”
next time you turn on the receiver.
Canceling the Sub-room Operations
On the front panel:
To stop the sub-room operations and sounds
from the sub-room speakers, press
SUB ROOM ON/OFF.
The SUB ROOM indicator on the display goes
off, and the SPEAKERS SUB ROOM indicator
on the display also goes off (no sound will be
heard in the sub-room).
• You cannot use this receiver for the sub-room operations any
more.
To use this receiver for the sub-room operations again
1. Press SUB ROOM ON/OFF.
The SUB ROOM indicator lights up on the
display, and the SPEAKERS SUB ROOM
indicator also lights up on the display if it has
been activated.
2. Press SUB ROOM CONTROL.
The name of the current source for the sub-
room appears on the display.
From the remote control:
To stop the sub-room operations and sounds from the sub-room
speakers, press SUB ROOM ON/OFF.
The SUB ROOM indicator on the display
goes off, and the SPEAKERS SUB ROOM
indicator on the display also goes off (no
sound will be heard in the sub-room).
To use this receiver for the sub-room operations again, press
SUB ROOM ON/OFF again.
The SUB ROOM indicator lights up on the display, and the
SPEAKERS SUB ROOM indicator also lights up on the display if it
has been activated.
Notes:
• If you have turned off the sub-room sound with the volume level set
at more than level “40, the volume level will be automatically set at
level “40” next time you turn on the sub-room sound.
• If “TURN ON MAIN OR SUB ROOM” appears on the display, press
MAIN ROOM ON/OFF or SUB ROOM ON/OFF to listen to the
sound in the main room or in the sub-room; otherwise, the receiver
will turn off after about 1 minute.
SUB ROOM ON /OFF
SUB ROOM ON /OFF
SUB ROOM CONTROL
ON/OFF ON/OFF
SUB ROOM MAIN ROOM
SUB ROOM MAIN ROOM
STANDBY ON
STANDBY ON
EN14-26.RX-9010VBK[C]f 01.4.13, 5:38 PM 24