Jura Capresso IMPRESSA J5 - Manual (Page 61)

61
8 Maintenance
Turn the selection lever to the milk or milk foam
position.
k l Press the steam button.
HEATING
READY
k l Press the steam button again.
STEAM
Ä l Turn the Rotary Switch until 60 SEC appears on the
display.
STEAM - The nozzle and pipe are cleaned.
Press any button as soon as the receptacle with the Auto-
Cappuccino Cleaner is empty.
Rinse the receptacle thoroughly, fill it with 250 ml of fresh
water and immerse the milk pipe in it.
k l Press the steam button.
ä l Turn the Rotary Switch until 60 SEC appears on the
display.
STEAM - The nozzle and pipe are rinsed with fresh water.
Press any button as soon as the receptacle with the water is
empty.
Carefully remove the Professional Cappuccino Frother from
the Connector System © .
Disassemble the Professional Cappuccino Frother into its
components.
Rinse all the nozzle parts thoroughly under running water.
Reassemble the Professional Cappuccino Frother and attach
it to the Connector System © .
The cleaning of the Professional Cappuccino Frother is fin-
ished.
l
l
l
l
l
l
l
l
Disassemble
Professional
Cappuccino Frother Disassemble
Professional
Cappuccino Frother